{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}
{{ 'in_app_browser_popup.desc' | translate }}
{{ childProduct.title_translations | translateModel }}
{{ getChildVariationShorthand(childProduct.child_variation) }}
{{ getSelectedItemDetail(selectedChildProduct, item).childProductName }} x {{ selectedChildProduct.quantity || 1 }}
{{ getSelectedItemDetail(selectedChildProduct, item).childVariationName }}

DynaVap 已經相當成熟,但好玩嘅地方,就係仲有好多細節可以調整。無論準備入手第一支,定係想再 Upgrade,希望今次可以幫到你。
對經常使用 DynaVap 嘅用家,IH(Induction Heater)係 Cloudy 第一推薦嘅 Upgrade。
相比火槍,IH 輸出更加穩定,亦可以用較低設定配合較長時間,令整體表現更加均勻。對掌握唔好火力、位置或者時間嘅用家,亦可以減少好多操作上嘅變數,減少過度火力造成嘅積聚,日常清潔相對輕鬆。
最新 IH 3.0 最高支援 100W 輸出,改用雙 21700 電池,電量比上一代更充裕,同時兼容更多不同裝置。每部唔同嘅獨特木紋,亦係 3.0 受歡迎嘅原因之一。
直接套上 Captive Cap,增加保溫效果,令 Heat Cycle 更長、更穩定。適合追求更長時間體驗,或者經常配合玻璃使用嘅用家;亦有較輕、反應更快嘅 Titanium Cap Armor 選擇。
想由不鏽鋼升級到 鈦金屬 Tip,會帶來更輕重量及更快嘅升降溫反應。Halo 著重均勻熱力分布及平衡表現;Helix 就以輕量及高 Airflow 為特色。
Bonger 可以將大部分 DynaVap Tip + Cap 組合直接接駁 10mm / 14mm Water Pipe。透過水過濾及冷卻,令整體體驗更順、更柔和,特別適合經常使用玻璃配搭嘅用家。
Captive Cap|Click 變得唔穩定、變形或損壞,清潔後仍然異常就可以考慮更換。
CCD 網|保持定期清潔,出現堵塞、變形或明顯影響氣流時就應更換。
O-ring|變硬、裂開或鬆動時更換,平時可配合 DynaWax 作保養。
普通火機並非完全用唔到,但日常使用我哋會建議選擇單火焰、防風、可調校火力及可重複充氣嘅火槍。火力太強或太弱都會影響效果,穩定而合適嘅火力先係重點。
經常使用|IH
提升效能|Titanium Tip / Cap Armor
玻璃配搭|Bonger
日常保養|Cap / CCD / O-ring
使用火槍|單火焰、防風、可調校火力
IH 對 DynaVap,就好似個爐對打邊爐一樣重要。如果你一直糾結火力、位置同技巧,但效果都係差少少,一部穩定嘅 IH 好多時已經可以解決大部分問題。
如果唔打算使用 HyperDyn,其實 IH 2.0 已經好夠用,而且更細、更輕,帶出街都方便。
DynaVap 發展到今日已經非常成熟,好多 Upgrade 未必一換就有好大分別,反而係用得耐、完全掌握之後,先會慢慢感受到每一個細節帶來嘅變化。亦正正因為咁,先可以一路微調出最啱自己嘅配搭。
最後都係嗰句,Upgrade 之外,保養一樣重要。全金屬設計,一個細小零件、一個設定,都可能影響整體表現。DynaVap 係值得花時間慢慢玩嘅產品,入手之前都要預咗比少少時間去了解佢。
DynaVap is already a highly refined system, but there are still plenty of ways to fine-tune the experience. Whether you're choosing your first setup or looking for an upgrade, here are the options we think matter most.
01|IH — Our First Upgrade Pick
An Induction Heater provides more consistent output and removes many of the variables involved with torch technique. Lower settings with a longer cycle can also provide a more even overall experience.
IH 3.0 supports up to 100W, uses dual 21700 batteries for greater capacity, and offers broader device compatibility. Its unique natural wood grain — different on every unit — is also one of its most popular features.
02|Tip + Cap
Cap Armor retains more heat for a longer, more stable heat cycle. Halo and Helix Titanium Tips offer lighter weight, faster thermal response and different airflow characteristics.
03|Bonger
Connect compatible DynaVap Tip + Cap combinations to 10mm / 14mm Water Pipes for additional cooling and a smoother experience.
04|Maintenance
Keep the Cap, CCD and O-rings clean and check them for wear. Replace parts when they become damaged, blocked or no longer perform normally.
05|Torch
A single-flame, wind-resistant, adjustable and refillable torch offers better control. Too much or too little power can both affect the result.
Frequent Use|IH
Performance|Titanium Tip / Cap Armor
Glass Setup|Bonger
Maintenance|Cap / CCD / O-ring
Torch Setup|Single-flame, wind-resistant & adjustable
For us, an IH is one of the most important additions to a DynaVap setup. If torch technique is holding you back, a consistent IH can remove many of those variables.
If you don't plan on using a HyperDyn, the IH 2.0 is already more than enough for most DynaVap setups — and it's smaller, lighter and easier to carry.
DynaVap is already a very refined system, so not every upgrade creates a dramatic difference. Once you know your setup well, those smaller changes start to matter. Upgrade what matters to you, keep it maintained, and take the time to find your own setup.