TOPIC：REVIEW / FLOWER MILL ·
ENGLISH VERSION ↓

一個 Grinder 賣到 HK$2,380，已經唔係一般「貴少少」嘅級數。 Flower Mill 3.5" Pro 貴為 CLOUDY 史上最貴嘅 Grinder， 究竟佢貴咗喺邊，又值唔值得買到 Pro？

☁ WHY SO EXPENSIVE?

3.5" Pro 唔只係將普通 Flower Mill 放大。每次最多可處理約 7g， 機身更深、milling surface 更大，再加入全新 Pro Locking Plate System。

Pro 專用 Mill Plates 比一般版本更厚、更硬，加入鎖定設計； 細孔 Plate 亦經過特別處理，減少材料黏住。

☁ FLOWER MILL DESIGN

Flower Mill 最大特色一直都係無齒設計。 利用 milling plate 令材料逐步散開，做出比較鬆、均勻嘅效果。 Pro 就將呢套設計進一步放大，配合更高容量同更完整嘅結構。

所以買 Pro，唔只係買更大容量， 而係 Flower Mill 將無齒 milling 呢套設計做到目前最完整、最高階嘅版本。

☁ CLOUDY SAYS

如果只係想體驗 Flower Mill 嘅無齒設計，其實 Standard 或 Premium 已經足夠， 未必要直接買 Pro。

3.5" Pro 價錢的確偏高，但如果你想搵一個 3.5 吋、無齒、可更換 Mill Plate、容易清潔又耐用嘅 Grinder， 佢嘅整體設計已經近乎完美，市場上亦好難搵到真正同級嘅選擇。

如果用量較高，3.5" 處理大量材料嘅效率優勢，亦係唔少用家由 2.5" 升級後最有感嘅分別。

Grinder 就好似一把好刀，每日可能都會用到，而且一用可能就係好多年。
造工、手感同長期使用體驗，有時比單睇價錢更重要。

☁ HIGHLIGHT
貴，但亦真係難搵替代。
3.5"、無齒、可換 Mill Plate，加上容易清潔同耐用， Pro 幾乎將 Flower Mill 呢套設計做到盡。
ENGLISH VERSION ＋

At HK$2,380, this is far beyond the price of a typical grinder. The Flower Mill 3.5" Pro is now the most expensive grinder CLOUDY has ever carried. So what makes it so expensive, and is the Pro really worth it?

☁ WHY SO EXPENSIVE?

The 3.5" Pro is more than a larger Flower Mill. It can handle up to around 7g per load, with a deeper body, larger milling surface and the new Pro Locking Plate System.

Its dedicated Pro Plates are thicker and more rigid, with a locking design. The finer plates are also designed to reduce material sticking during use.

☁ FLOWER MILL DESIGN

Flower Mill’s biggest difference has always been its toothless design. Instead of traditional sharp teeth, the milling plate gradually breaks material apart for a lighter and more even result. The Pro takes the same concept further with greater capacity and a more complete structure.

So the Pro is not simply about having more capacity — it is Flower Mill’s most complete and highest-end version of its toothless milling system.

☁ CLOUDY SAYS

If you simply want to experience Flower Mill’s toothless design, the Standard or Premium models already cover the most important part of the experience. You do not necessarily need to jump straight to the Pro.

The 3.5" Pro is definitely expensive, but if you are looking for a 3.5-inch toothless grinder with interchangeable Mill Plates, easy cleaning and long-term durability, its overall design is close to complete and there are very few true alternatives on the market.

For higher-volume use, the 3.5" is noticeably more efficient with larger amounts — one of the biggest differences users notice when upgrading from a 2.5".

A grinder is a lot like a good knife — you may use it every day, and keep using it for years.
Build quality, feel and the long-term experience can sometimes matter more than price alone.

☁ HIGHLIGHT
Expensive — but genuinely hard to replace.
3.5", toothless, interchangeable Mill Plates, easy to clean and built to last — the Pro pushes the Flower Mill concept about as far as it can go.
☁ EXPLORE｜FLOWER MILL
Standard・Premium・Pro・Mill Plates

Explore Flower Mill → 

文章綜合 Flower Mill 官方資料及 Cloudy 產品資料整理，只供一般參考；實際使用體驗因人而異。
Content is based on Flower Mill official information and Cloudy product information for general reference only. Individual experiences may vary.